I wish I could re-find the Unity Community article where I found this solution so I could credit the original source. If I find it I’ll link here.
Anyway, if you’re here you might be getting error 0x0000142 trying to run Unity Editor 2019.2.x in a virtual machine in KVM (or another hypervisor).
The culprit is openimagedenoise.dll
The fix is simple: Install any version of Unity Editor 2019.3.x (either directly or from the Unity Hub) and copy openimagedenoise.dll from the Unity Editor 2019.3.x folder to the Unity Editor 2019.2.x folder. Overwrite the existing file.
If you’re using Unity Hub that’s: From: C:\Program Files\Unity\Hub\Editor\2019.3.0b4\Editor\openimagedenoise.dll (Replace 2019.3.0b4 with whatever 2019.3 version you installed) To: C:\Program Files\Unity\Hub\Editor\2019.2.18f1\Editor (Again, replace 2019.2.18f1 with whatever 2019.2 version you’re using)
That’s it! Run Unity 2019.2 and everything should just work.
I recently upgraded a whole bunch of Windows 10 desktops to build 1903. There were almost no issues, but I found a that more than a few had trouble with the Windows Photos app afterwards.
Here’s the collective wisdom I’ve found on how to fix it:
The Windows 10 Photos app is installed per user, so make to sure to log into the computer as the user having the problem.
Or, can a man fall in love with KDE, 20 years later
KDE has never been able to capture my heart. I remember trying KDE 1.1 or so on Madrake Linux 6 in the late 90s. It just never clicked for me. I opted instead for Enlightenment. Ever since then, I’ve tried it every year or so to see if I could understand peoples’ love for it. I didn’t fall for KDE 3.5 that so many people remember fondly, or KDE 4, which people recall much less fondly. I’ve peeked in on KDE Plamsa 5 during it’s development, but it never was able to bring me in. But here I am, in 2019, about 20 years since I started using Linux, and I’ve giving KDE Plasma 5.16.4 a go!
Background
So, why now? Well, as I said, I try KDE every now and then. Something about it always draws me in, before turning me off again. I recently ended up down an internet rabbit hole following articles on Plasma mobile, Qt Python bindings and even Qt C# bindings for .Net Core (and I love me some C#). I wondered: “Could Plasma, Plasma Mobile, Qt, and C# be the epic combo of my dreams?” Let’s find out!
Setup
I’m running KDE Plasma 5.16.4 on KDE Neon Linux. Neon is based on Ubuntu 18.04 LTS using KDE’s own, and constantly updated, repos for Plasma itself. I figured as long as I’m giving a fair shake, I ought to go right to the source. (As I’ve written this article, I’ve upgraded across a few versions of 5.x Plasma)
I’m running it on my trusty desktop with a Core i7 920, AMD Radeon RX 560, 12 GB RAM, a 512 GB SSD, and a HiDPI monitor at 3840×2160. It’s my daily driver at home for general computing, gaming, and game development.
I’m also running the X11 version of Plasma, rather than Wayland. I did some testing and Wayland seems to be particularly fluky with AMD graphics, though remarkably stable on the Intel-graphics based laptop I tested on. Your mileage may vary.
Window Dressing
At work I use a Mac, so having the close, minimize and maximize icons on the left just keeps my flow going. I really thought this was going to be one of those “sorry, can’t do with Plasma” things. Oh, how wrong I was! In face, Plasma lets you customize all the icons on title bar.
Titlebar icon placement is handled by the “Look and Feel of Windows Titles” settings menu.
Bluetooth
I was able to connect a Bluetooth Microsoft Arc Mouse and my Apple AirPods without any difficulty whatsoever. Major bonus in my book!
Scaling
One of things I love about Plasma is the decimal-based resolution scaling. Wheres the GTK-based desktops I’ve used require scaling at 1x, 2x, 3x, etc., Plasma allows you too choose, for example, 1.5x. This is a huge improvement for HiDPI displays.
The caveat is, you’re probably not going to be running all Qt apps. Invariably, you’ll also run some GTK apps as well. These will ignore your scaling. This was the case for me with Unity Editor.
Luckily, there’s an easy fix!
Open kmenueditor
Find the app you need to scale
Prefix the command with: GDK_SCALE=2 GDK_DPI_SCALE=0.5
Multiple Displays
While this isn’t an issue for me on my main computer, I did want to see how Plasma handled multiple monitors in case I’m able to get a 2nd display at home someday. Using a test laptop with Intel-based graphics I had no problem at all running Plasma with two 4K monitors daisy chained with DisplayPort.
Extra Surprises
PSD Previews
One of the things that drives me crazy about Nautilus is that it doesn’t support the preview of PSD files out of the box. Perhaps there’s a plugin or setting somewhere, but not that I could find. I was thrilled to open a folder with a whole slew of PSD files and see previews of them working by default.
Latte Dock
If you’re a lover of docks like I am, I can’t recommend Latte Dock highly enough! Latte Dock is integrated beautifully into the Plasma ecosystem, with all the fun stuff like pinning and app actions. For example, the Spotify app will give you playback options right from the dock icon.
Issues
Media over SMB
Dolphin (KDE’s file manager) does fantastic job of browsing SMB shares. It’s handy to be able to view shares without actually mounting them, but there’s quite a few drawbacks. Most frustrating was getting media to play when double clicking the file. I was eventually able to get it to work with VLC by using the snap version and dragging/dropping the file into the VLC window, but this still required me putting in my username and password for each video. My recommendation: mount the share, and everything works fine. I found smb4k recommended in a forum for this, and it does a fantastic job. Just make sure to exclude it’s default mount point, ~/smb4k, from your backup jobs.
Discover
Discover is Plasma’s app installation and system update tool. It’s gotten much better over the years (and even since I began writing this article), but can still be finicky.
[Update: the awesome Nate Graham fixed what was apparently an issue with how kmenuedit comes up in search results. Thanks so much! https://invent.kde.org/plasma/kmenuedit/-/merge_requests/5] For example: if I search for ‘kmenu,’ I get nothing. It’s not until I search for ‘kmenuedit’ that I get a search result. I just seems by now that I should be able to do a partial search and good results.
Wherefore art thou kmenuedit?Oh, there you are.
I will say this about Discovery: it’s ability to handle both apt and snap versions of packages is very convenient!
KRDC
KRDC is a Qt-based remote desktop app for Plasma. It works great on a regular-resolution displays, but has some strange scaling issues for me on a HiDPI display and AMD graphics. I like to have a bunch of remote desktop sessions open at once, so I’ll typically have the remote desktop display be the current size of the client window. This works great in Remmina (the GTK equivalent of KRDC), but with KRDC I can never get it working quite right. (See below)
My old Windows VM and Plex server, before I migrated it to Ubuntu
Verdict
I’m sold! I started this article about four months ago wondering when I’d switch from Plasma back to Budgie. Now, I can say without a doubt that Plasma will remain my desktop of choice for the foreseeable future. Great job Plasma team!
Welcome to Part II of my Ubuntu Home Server build! In Part I, I did a very basic Ubuntu Server install. In this part, I’ll be creating a ZFS pool and volumes to store all my data on.
Disk 2: SSD for L2ARC caching (improves read performance)
Disk 3 – 7: HDDs for ZFS Pool (where all my data with be stored)
Quick disclosure: I’m *far* from a ZFS expert. From what I’ve gleaned, this should suffice for home / small business use. If you’re planning something enterprise-grade, find an expert!
Install Ubuntu
Perform a regular Ubuntu server installation, or use an existing server.
SSH Into the server, rather than using the console. You’ll want to be able to copy and paste when you setup the zpool.
Install ZFS
sudo apt install zfsutils-linux
Create the ZPOOL
I’ll be using RAIDZ (which is like RAID-5) to get redundancy on my disks without losing too much usable space.
ZFS offers many other options, like RAID0, 1, 6, etc. Use whichever is appropriate for your workload.
It is very strongly recommended to not use disk names like sdb, sdc, etc. Those might change across reboots.
Many of the articles I’ve read suggest using UUIDs . However, my experience on Ubuntu Server is that these are not assigned to blank disks. Therefore, I will be using disk paths instead.
These are verbose and a bit of a pain to type, but they make sure you know exactly what disk you are referring to should you need to swap drives in the future. They will also not change on reboots.
I chose to install Linux on my 1st drive (sda). I’ll be using sdb for the ZIL, sdc for L2ARC, and sdd, sde, sdf, sdg, and sdh to for the data pool.
First, I’ll setup the data pool. This is where SSH is handy, since you can copy/paste your paths from above.
In my example below, I’m naming my pool “data.” You can use a different name if you’d like. If your setup is like mine, you’ll create one pool with many volumes in it.
I’m using drives with 4k physical sectors, so I’m adding the option: -o ashift=12 This should increase performance, but at the cost of total storage space. You an remove this option if you don’t think it’s a good fit for you.
adam@normandy:~$ zpool list
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
data 18.1T 238K 18.1T - 0% 0% 1.00x ONLINE -
Next I’ll tell ZFS to use sdb as the ZFS Intent Log
sudo zpool add data log /dev/disk/by-path/pci-0000:02:00.0-scsi-0:0:1:0
Then I’ll tell ZFS to use sdc as the L2ARCH cache
sudo zpool add data cache /dev/disk/by-path/pci-0000:02:00.0-scsi-0:0:2:0
If I run zpool status, I should see my data, ZIL, and cache drives
adam@normandy:/data/download/secure$ zpool status
pool: data
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
pci-0000:02:00.0-scsi-0:0:3:0 ONLINE 0 0 0
pci-0000:02:00.0-scsi-0:0:4:0 ONLINE 0 0 0
pci-0000:02:00.0-scsi-0:0:5:0 ONLINE 0 0 0
pci-0000:02:00.0-scsi-0:0:6:0 ONLINE 0 0 0
pci-0000:02:00.0-scsi-0:0:7:0 ONLINE 0 0 0
logs
pci-0000:02:00.0-scsi-0:0:1:0 ONLINE 0 0 0
cache
pci-0000:02:00.0-scsi-0:0:2:0 ONLINE 0 0 0
errors: No known data errors
Create the Filesystem
Now that the zpool exists, we can create filesystems on top of it. A pool can have multiple filesystems. I’ll create one for media, and one for virtual machines (because that’s what I need).
zfs set xattr=sa data/media
zfs set atime=off data/media
zfs set compression=lz4
All of your zfs filesystems are automatically mounted.
adam@normandy:~$ mount
...
data on /data type zfs (rw,xattr,noacl)
data/media on /data/media type zfs (rw,xattr,noacl)
data/vm on /data/vm type zfs (rw,xattr,noacl
You can use them just as you would any mounted filesystem. That’s it!
For anyone who’s installed Ubuntu Server before, there’s not much here for you. I’m putting this here for anyone starting out with Ubuntu and for the sake of completeness.
Also, my 1st warning: this is the setup I think will serve me best for my particular situation. It may not be the best for you, and, while it’s somewhat redundant, it certainly isn’t “enterprise-grade.” You were warned ?
In the steps below, anytime you see something in brackets, replace it with the correct value for your system, without the brackets. For example, if you see: ssh [username]@[ip address] You should really enter something like: ssh me@192.168.1.1
Why Ubuntu?
All the major Linux distros are awesome. You really can’t go wrong! For servers, I’ve typically gone with Centos in the past (and on this Ubuntu server will be many Centos virtual machines). However, there is one reason I’ve decided to go with Ubuntu in this instance: ZFS. Ubuntu has ZFS baked in, whereas Centos and Fedora require recompilation of kernel modules after major OS upgrades. Since I want this box to be as turnkey as possible (if it goes down, my internet will go down as well), Ubuntu it is!
Installation
First, download the Ubuntu Server iso from Ubuntu. I’ll be using the 18.04 LTS release, since I prefer to stick to LTS releases for critical infrastructure.
Next, either burn the iso to a DVD or image it to a flash drive. If you use the flash drive method, I recommend Fedora Media Writer. It’s available for Windows, MacOS, and Linux, and will image pretty much any Linux distro to USB.
Once you’ve got a bootable DVD or flash drive, boot from it. Most servers and workstations will tell you which key to press on the keyboard to get to your BIOS/UEFI boot menu.
After booting, choose *Install Ubuntu Server.
Choose your language.
Choose your keyboard layout.
Choose Install Ubuntu.
I’m going to use DHCP for now and set static IP later when I configure the virtualization networks for KVM. If you need to configure a static IP, you can do so here.
If you use an internet proxy, set it here.
Choose the default Ubuntu mirror.
I prefer to use LVM in case I need to resize partitions in the future.
I’ll be using one SSD as a boot volume. Choose whichever drive you’ll be booting from. I’ll be using all of the rest of the drives for ZFS, so I’ll leave them as they are for now.
By default, Ubuntu will only use 4GB of your drive for the root partition. Since all of my other data will live my ZFS volumes, I’ll expand the volume to use the whole 1TB.
To change the size of the root volume, use the down arrow to chose “ubuntu-lv,” press Enter, then choose “Edit.”
Ubuntu will helpfully tell you the max size you can set the partition to. Enter that number and choose “Save.”
Choose “Done.”
Let Ubuntu know your name, your computer’s name, the username you’d like to use, and the password you’d like to use.
You now have the option of installing a secure shell server. This will allow you to log in remotely. I’ll be installing this.
You also have the option of installing some other services. You can always install these later. I’ll be skipping them and just choosing “Done.”
When the installation has finished, choose “Reboot Now.”
Remove the bootable DVD or flash drive and press Enter.
Log In
Once the server has rebooted, you can log in to the server itself or via SSH (if you installed SSH).
If you need to find out your server’s IP address for SSH, log in via the console and run the following:
ip address
Then on the computer you are using to SSH into the server run:
ssh [username]@[ip address]
Updates
Before anything else, let’s make sure everything is up-to-date.
sudo apt upgrade
Once that has completed, you may need to reboot.
sudo reboot
KDE On a Server?
Let’s get right to it: it’s not considered security-wise to install a GUI on a server. However, I’ll be using things like Handbrake and Virtual Machine Manager, so I’ll be putting on KDE. To add a bit of security and save memory, I’ll manually start KDE when I need it.
To install just the very minimum of KDE (you can always add the other bits later), run:
I’m also going to install a couple other KDE apps to make my life easier. KDE’s Konsole terminal and the dolphin file manager:
sudo apt install konsole dolphin
If you want all of KDE, and have it start be default, you can simply run this instead:
sudo apt install kubuntu-desktop
If GNOME is more your thing, you can install it with:
sudo apt install ubuntu-gnome-desktop
If you install just the minimum KDE, your server will still boot in console mode. To start KDE, simply log in and run:
startx
Since I’ll often want to use the UI remotely, I’m also going to install a package called xrdp. This will serve a desktop over the RDP protocol so I can get a desktop remotely:
sudo apt install xrdp
This will install xrdp, configure the service to start automatically, and start the service. Once it’s finished, you can connect to your server’s IP address via any remote desktop app and use the same username and password you use to log in locally.
I finally picked up a used Dell PowerEdge R720 from the fine folks at ServerMoney to replace my current home server (a Frankenstein of workstation parts).
I thought I’d document my setup for anyone that might be interested and for my future self that wondered what exactly I did in the 1st place ?
My server needs are quite diverse, so I’ll break this guide into separate posts for each one to keep things organized. (links will be active once each part is finished)
Since my previous article Upgrading to PostgreSQL 10 on Centos 7 was so popular, I though I’d do a follow-up for anyone looking to upgrade a very simply configured PostgreSQL 10 server to PostgreSQL 11 on Centos 7.
First, and this goes without saying, backup your server!
Update: This is for the original Mass Effect release on Steam, not Mass Effect Legendary Edition. It’s possible it will work for both, but I haven’t tried it.
I’m a few days late for N7 day, but I figure this information is useful nonetheless!
I’ve always done my Mass Effecting on XBox 360 or XBox One. But now that Steam has many Windows games working on Linux, I figured: what heck, let’s start over again there! (I’m not the only one who plays Mass Effect on loop right? Bueller? Bueller?)
Everything worked like magic right from the get-go, except audio. You’ll probably get sound from the corporate logos, but nothing when you play the game. If you try to turn off hardware audio in the settings, which is culprit, Mass Effect will dutifully turn it back on again.
On a very ordinary day I decided to upgrade my Plex server from Fedora Server 27 to version 29. When I rebooted, Grub failed to find anything bootable. Then my day stopped being ordinary.
Luckily I snapshotted the VM first, since figuring this out involved restoring and trying again more times than I’d like to admit. But enough of my story of woe. If you’re here, you just want to know how to fix grub!
Likely you rebooted before noticing something was wrong. If this was a VM that you have a working snapshot of, restore the snapshot and skip ahead to “Fixin’ Time!”. If not, boot a Fedora live DVD, choose rescue, then option 1 to mount all of your partitions.
Once mounted, follow the on-screen instructions to chroot into your mounted partition.
Fixin’ Time!
Make sure /boot and /boot/efi are mounted. If not, this fix won’t work.
sudo -s
mount /boot && mount /boot/efi
If you’ve got a standard installation like mine, you won’t have the grub tools installed, so install them.
dnf install grub2-efi-x64 shim-x64
Now the magic step.
grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
Important Note!
Do NOT run grub2-install. This is not for EFI systems and will end up with getting nothing but a blank Grub prompt.
Finally, reboot.
reboot
That’s it! You should have a working Grub menu now. If not, you may need to try some of the additional steps listed in Fedora’s documentation linked above.
When Unity 2018.1 was released I jumped (perhaps too quickly) to using “.Net 4.x Equivalent” for the scripting runtime version under “Build Settings->Player Settings.”
Everything ran fine in the Unity Editor, but socket reads would silently fail after a few seconds on iOS.
I use SSLStream and SSLStream.Read() in a while loop running under its own thread. This runs without any issue using IL2CPP under the .Net 3.5 runtime, but fails almost immediately under iOS using 4.x.
